Products - Ethernet Products

Media Converters

Ethernet Media converters provides media conversion from 10/100BASE-T to 100BASE-X on multimode or single mode fiber

learn more

Managed Media Converters 

Managed Dual-channel Gigabit Ethernet media converter

learn more

Ethernet Powered Switches

Cost-effective switch powering the Wireless Access Points and standard PoE equipments.

learn more

Media Converters 

 FCAT-01

The series of Fast Ethernet Media converters provides media conversion from 10/100BASE-T to 100BASE-X on multimode or single mode fiber ranging from 2km to 10 km . Complete offering to suit Carriers, Service Providers&Enterprises for wide range of deployments.

  • Unmanaged Fast Ethernet media converter which supports 10/100Base-Tx to 100Base-Fx media conversion
  • 1 x 100 Base-FX (SC) optical port and 1 x Fast Ethernet port
  • Speed (Auto, 10/100 Mbps), Duplex (Full/Full) selection via dip switch
  • Link fault pass through support
  • Transparent pass through for VLAN Tagged and untagged user traffics
  • Link, Activity & Speed LED indications
  • Multimode, Single mode & Single fiber options
  • Maximum distance up to 100Kms on Single Fiber
  • Works opposite with OAK-13 chassis and standard 3rd party switches and media converters
  • Available in 230 VAC, 24VDC, 48VDC & 9VDC via adaptor power supply ordering options

OAK-13 / HOSTA-UG-R

The series of Fast Ethernet Media converters provides media conversion from 10/100BASE-T to 100BASE-X on multimode or single mode fiber ranging from 2km to 10 km . Complete offering to suit Carriers, Service Providers&Enterprises for wide range of deployments.

  • Unmanaged Fast Ethernet media converter which supports 10/100Base-Tx to 100Base-Fx media conversion
  • 1 x 100 Base-FX (SC) optical port and 1 x Fast Ethernet port
  • Speed (Auto, 10/100 Mbps), Duplex (Full/Full) selection via dip switch
  • Link fault pass through support
  • Transparent pass through for VLAN Tagged and untagged user traffics
  • Link, Activity & Speed LED indications
  • Multimode, Single mode & Single fiber options
  • Maximum distance up to 100Kms on Single Fiber
  • Works opposite with OAK-13 chassis and standard 3rd party switches and media converters
  • Available in 230 VAC, 24VDC, 48VDC & 9VDC via adaptor power supply ordering options

HOSTA-UG

Stand Alone, compact and low-cost Triple-speed Gigabit Media converter and low cost solution for ISP.

  • Single channel triple-speed, stand-alone media converter
  • Complies to IEEE, IEEE802.3z
  • Media Conversion from 10/100/1000Base-T to 1000Base-FX
  • Auto MDI-I/MDI-X copper Ethernet port
  • RJ-45 connector for 1000Base-T port
  • SC connector for 1000Base-X fiber port
  • Supports upto 10K jumbo frame @1000Base-T
  • Transparent Pass-through Tagged & untagged data traffic
  • Supports Copper FEF Indication.
  • Supports Fiber FEF Indication.
  • DIP switch configuration for enabling LFP
  • Link/ Activity, LFP/FEF LED indications
  • Multimode, Single mode & Single fiber support
  • LFP (Link Fault Pass through) allows the fiber failure to be propagated to the copper port and vice-versa

HOSTA-UG-D

Standalone Dual Triple Speed Gigabit Media converter with AC/DC power supply.

  • Dual channel triple-speed, stand-alone media converter with Store and forward architecture
  • Complies to IEEE standards
  • Support for Dual channel Copper with 10/100/1000BaseT (RJ45)
  • Supports Dual channel fiber 1000B-X (SC connector) with MMF/SMF & SF optics
  • Supports Fiber Redundancy.
  • Support 10K Jumbo Frame @1000BaseT.
  • Supports Copper/Fiber Link Fault Propagation.
  • Supports Copper/Fiber Link Fault Propagation Indication ( in dual channel media converter mode)
  • Supports Copper/Fiber Far End Fault Indication.
  • Dual Media Converter or Redundancy Mode Indication
  • Support for Fiber in 1000Base-FX Full Duplex
  • Transparent Pass through Tagged and untagged data traffic.
  • AC/DC power supply

Managed Media Converters 

 FCAT-1000J

Managed Dual-channel Gigabit Ethernet media converter, with a standard SNMP management. Supports SFP/ SC modules to suit any mode and optical budget.

  • Managed dual channel stand-alone Gigabit Media Converter which supports Point to point & Point to Multipoint topologies
  • 2 x 1000 Base-FX (LC) SFP ports and 2 x Gigabit Ethernet ports
  • Port admin status (enable/disable), Auto negotiation (enable/disable), Speed (Auto, 10/100/1000Mbps) & duplex configuration support
  • Jumbo Frame & Flow Control support
  • Dying gasp alarm generation/clear (IEEE 802.3ah)
  • Link Fault Propagation and OAM support
  • Transparent pass through for VLAN Tagged and untagged user traffics
  • Optional variant to support optical redundancy with 0 pack drops and no delay
  • Dual firmware image & configuration back-up support
  • Jumbo frame support up to 9600 bytes
  • Multimode, Single mode & Single fiber options
  • Works opposite with OAK-10 chassis and standard 3rd party switches and media converters
  • In-band & Out of Band Management support with CLI, Telnet, Web browser, SNMP & LITEVIEW NMS
  • AC & DC Power supply ordering options

Ethernet Powered Switches

DAISY-105IPM

Daisy105-IPM is a cost-effective switch powering the Wireless Access Points and standard PoE equipment via the user ports and also through local or uplink Fast Ethernet Port.

  • Outdoor PoE Switch with Power manager which receives power from the user PoE ports to power self and one Wireless CPE
  • 1 x Uplink PoE port and 4 x User PoE ports
  • Cost effective solution to deliver internet service without power back-up & battery banks at access level
  • Store & Forwarding switching
  • IP64 compliant weather proof enclosure
  • In-built Lightning and surge protection
  • Port to port Isolation between user PoE ports
  • Input DC Power from user PoE injectors

FABIO-104

It provides four Fast Ethernet Copper and one Fiber Interfaces to enable connectivity for small business and enterprises.

  • 1 x 100 Base FX (SC) Port and 4 x Fast Ethernet ports
  • Unmanaged 5 port Fast Ethernet Port Switch with store and forward architecture
  • Support for auto Negotiation Enable/Disable for all the Fast Ethernet ports
  • Port isolation between Fast Ethernet ports configuration via dip switches
  • Jumbo frame support up to 9000 bytes
  • Supports multi mode, single mode and Single Fiber options
  • Maximum distance up to 100 Kms on single mode - single & dual fibers
  • Works on point to point scenario and opposite with standard 3rd party switches and media converters
  • Internal auto-ranging AC or DC power supply

FABIO-104-POE

FABIO-104 PoE is a 5-port Fast Ethernet Unmanaged switch. It provides 4 Fast Ethernet Copper out of which 2 ports provides PoE(802.3 af) compliant and one Fiber Interfaces to enable connectivity for small business and enterprises.In addition, the switch also has port –isolation and separation capabilities, which provides much needed security in umnanaged network deployments.

  • 5-port Fast Ethernet Switch with PoE capabilities
  • Support for Auto Negotiation Enable/Disable for 4 Copper Ports via DIP switch settings
  • Complies IEEE 802.3x, 802.3u
  • Architecture : Store and forward
  • 2 FE Copper Ports (10/100) (RJ-45) with IEEE 802.3af support for
  • PoE
  • 2 FE Copper Ports (10/100 ) (RJ-45)
  • 1 Fiber 100B-X (SC connector)
  • PSE (Power Sourcing Equipment) which can source power to IEEE
  • 802.3af compliantPD(powered device)
  • Supports Port isolation and port separation
  • Aggregator Mode support

BULGE-08-08P

BUGLE-08 is a semi-managed 8-port switch supporting 7 Copper ports and 1 Fiber port. Switch with Fiber port is an ideal solution for ISP providers for data network extension & distribution. As device supports Reverse PoE, power can be derived from any remote source. The device is wall mountable & power can be sourced from remote place, thereby reducing dependency for middle-men power & space constraints. All cable connectivity can be enclosed inside the enclosure, thereby enabling deployment in less secured premises.

  • 8 x Fast Ethernet switch 7 x 10/100Base-Tports (RJ-45)
  • 1-port 100BaseFx – SC with MMF/SMF&SF optics
  • Supported modes – Switch mode, Aggregator-Cu & Aggregator-Fx
  • Flow Control IEEE802.3x
  • Port Based VLAN ,Port Isolation & Separation
  • Bandwidth Control and Broadcast storm protection
  • Transparent pass through for non-tagged and tagged data traffic
  • Reverse PoE - Device power sourcing from 1 user port via Power injector
  • Dust tight enclosure compliant to IP60 Wall mountable, compact enclosure