Specifications

•   G.SHDSL line
     Line Coding: 16 TC-PAM, 32 TC-PAM,128 TC-PAM is selectable
      Line Rate: 192K bps ~ 57000 Kbps for 2W.
     Protection: ITU-T K.20, K.21 and IEC60950
     Standard: ITU-T G.991.2, Annex A (Default), Annex B
     Impedance: 135Ù +/- 5 %
     Connector: RJ45 x 1
•    System Timing
     Payload timing(1) Internal clock, accuracy +/- 30ppm
     (2) T1/E1 input clock
     (3) Data port DTE clock[TT]
     (4) Line Recovered clock
•    SHDSL timing
     (1) Plesiosynchronous, local oscillator: 22.1184MHz +/- 32ppm
     (2) Synchronous
     Packet classification based on 802.1Q
      (3) Hybrid
•    E1 Interface
     Line rate 2048KHz +/- 50 ppm
      Line Code HDB3
      Framing PCM31, PCM30, PCM31C, PCM30C and unframed
      Data Rate 64 Kbps to 2048K bps [NX64Kbps, N=1 - 32]
      Operation Full E1 or fractional E1
      Pulse shape Meet ITU-T G.703
      Impedance balanced 120Ω +/- 5% resistive or unbalanced 75Ω +/-5% resistive
      Connector 120ohm RJ45 x 1
      Jitter Meets G.823 and G.824 jitter and wander requirements
     Electrical : Shielded Rj45
•   V.35 Data Port Interface :
      Interface V.35
      Data Rate 64 Kbps to 4608 Kbps
      Connector DB25F x 1 ( DB25 to MR34 adaptation cable provided )
•    Maintenance
     Loopbacks: Local and remote AL/DL loopbacks via front panel loopback buttons,
      DSL PRBS BER testing
     SNR, LOSW, ES, SES and UAS for DSL loops
      Supports G.821 and G.826 error performance statistics for E1 interfaces
     Management Interface: Ethernet
•    Power input
     DC : -36 ~ -72 VDC
      AC : 90 ~ 260V AC (47 ~ 63 Hz)
     AC and/or DC power source can be field selectable. The AC and DC power inputs can be served as power protection mutually.
•    Mechanical
      Enclosure : 234.4mm x 155.5mm x 44.2 mm (WxLxH)
•    Environment
     Temperature : 0 ~ 50 degree C
     Humidity : Up to 95% non-condensing
•    Designed to meet:
      EN 55022 and 55024 compliant Safety EN60950 compliant Surge immunity